Combination Machine (ML300)

Before using the machine, please read the following precautions:
1, Prior to use, the hood drilling and milling and turning the gear case cover is closed.

2, When not in use, to cut off the power to the machine.

3, Starter bed to remove the chuck wrench.

4, Keep the workplace clean mess of the environment may induce accidents.

5, not handheld workpiece. Must use the appropriate fixture to clamp the workpiece to ensure the safe and reliable processing.

6, when the operation you want to pay attention to balance not too leaned.

7, requires the right dress: Can not wear loose clothes, can not wear a tie, jewelry, gloves, easy to wind around the machine moving parts something. The proposed non-slip soles. Long hair use hair sets of beams rope.

8, using the right tool for the use of safe, efficient and high-quality work done makes sense.

9, knives, tools, attachments can not be used for non-specified (design range) uses.

10, should be a good maintenance tool its sharp clean. Grinding tool, please refer to the technical guidance information.

11, using the factory supplied accessories, use of improper attachments can result in an accident.

12, can not let the machine operate without state only cut off the power, and the machine is completely stopped before leaving.

13, tool change or maintenance operations must cut off the power.

14, can not stand on the machine. If you encounter a machine sharp edges or knives, is likely to cause serious injury.

15, do not use the machine in a dangerous place, do not want the machine to be placed in a moist environment or exposed to rain, the work environment should be dry.

16, to prevent the involvement of children. All visitors to keep a safe distance and machine tools. The work shop to have anti-children into the measures.

17, Other: Before each use of the machine, you should check all the major components and their functions in order to ensure that they are able to operate normally. Check the connection with the fastening of the various moving parts, the parts, if there is a crack or any other, is able to influence the machine to run correctly defects. Defective parts repaired or replaced.

If you have any questions, please contact the vendor or factory to get useful advice or help.

Installation and adjustment
With gasoline or a similar non-corrosive dissolved economy wash away the anti-corrosion coating on the machine, and then to the lubrication point oiling.

The machine bed has four lifting bolt, the hauled lifting bolt, be the machine jumping prepared horizontal work surface with screws through the through-hole machine tools fastening. Over bed

Standard accessories:
1.3-jaw chuck
2. Allen key
3. Open end wrench
4. Retreat set of wedge
5. Change gears kit
6. Dead center
7. Single head wrench
8. Taper shank drill chuck
9. Drill chuck
Special accessories:
1. Steady rest
2. Face plate
3. Turining tool kit
4. Square box
5.4-jaw chuck
6. Live center
7. Follow rsst
8. Vice
9. Milling cutter set
10. Machine base
11. Black plate